Barco G62 - Specifications for G62-W11

81R5914653 /02 G62
Power requirements 100-240V / 50-60Hz
Power consumption 625W nominal, 750W maximum
BTU per hour 2,133 BTU/h nominal; 2,252 BTU/h maximum
Standby power less than 0.5W
Noise level (typical at 25°C/
77°F)
36dB(A) - 40dB(A) depending on the used mode
Operating temperature 0 - 40 °C (sea level)
Storage temperature -10 to 60 °C
Operating humidity 10 - 85% RH, non-condensing
Storage humidity 5 - 90% RH, non-condensing
Dimensions (WxLxH) without feet: 484 x 529 x 195 mm / 19.1 x 20.8 x 7.7 inch with feet: 484 x
529 x 206 mm / 19.1 x 20.8 x 8.1 inch
Weight without lens: 17.4 kg / 38.4 lbs
Volume 50 dmm³
Shipping dimensions
(WxLxH)
596 x 628 x 395 mm / 23.5 x 24.7 x 15.6 inches
Shipping weight 22.6 kg
Standard accessories Power cord, wireless remote control
Certifications CE, FCC Class A, cTUVUS, CCC, EAC, KCC, RCM, BIS, BSMI
Warranty Limited 3 years parts and labor
A.2 Specifications for G62-W11
Overview
Projector type Single chip DLP laser phosphor projector
Technology 0.67"
Resolution 1,920 x 1,200 (WUXGA)
Brightness 9,500 ANSI lumens 10,600 center lumens 11,000 ISO lumens
Contrast ratio 1,200:1 sequential; 6,000:1 dynamic; Extreme black: 750,000:1
Brightness uniformity 90%
Aspect ratio 16:10
Edge blending properties horizontal and vertical edge blending
Lens type G-lenses - 0.36:1 / 0.65-0.75:1 / 0.75-0.95:1 / 0.95-1.22:1 / 1.22-1.52:1 /
1.52-2.92:1 / 2.90-5.50:1
Maximum screen size 400"
Optical lens shift Vertical up to 100%, depending on lens
Horizontal up to 30%, depending on lens
Motorized zoom and focus
Motorized lens shift
Specifications