Barco G62 - Page 95

95R5914653 /02 G62
UART command list Image menu
Level 2 Level 3 Level 4 Level 5 Default
Uart Command
Color mode Presentation Bright [DPMO0]
Bright [DPMO1]
Super Bright [DPMO2]
Cinema [DPMO3]
HDR [DPMO4]
sRGB [DPMO5]
DICOM SIM. [DPMO6]
Blending [DPMO7]
3D [DPMO8]
2D High Speed [DPMO9]
User [DPMO10]
Brightness 50 [BRIG*]
Contrast 50 [CONT*]
Saturation 50 [SATU*]
Tint 50 [TINT*]
Sharpness 8 [SHRP*]
Gamma 1,8 Enhanced [GAMM0]
2.0 [GAMM1]
Standard2.2 [GAMM2]
2,4 [GAMM3]
2,6 [GAMM4]
Graphic [GAMM5]
Video [GAMM6]
CRT(Vivid) [GAMM7]
Enhanced [GAMM8]
Film [GAMM9]
DICOM [GAMM10]
White Balance Color
temperature
Warm Standard [CTMP0]
Standard [CTMP1]
Cool [CTMP2]
Gain/Offset
(RGB)
Red Gain 50 [RGAN***]
Green Gain 50 [GGAN***]
Blue Gain 50 [BGAN***]
Red Offset 50 [ROFS***]
Green Offset 50 [GOFS***]
Blue Offset 50 [BOFS***]
White Peaking [WHPK**]
Reset Cancel [RSGO1]
Advanced Color Color Space Auto Auto [CSPA0]
RGB (0-255) [CSPA1]
RGB (16-235) [CSPA2]
REC709 [CSPA3]
Communication protocols