Operation
22
About the On-Screen Display (OSD)
There are two methods to control the display
To control the display you can use:
• Quick OSD: To quickly access the most important controls.
• Extended OSD: To access all the display controls. The extended
OSD can be used in two modes: standard and advanced (see
further).
About the Quick OSD
• The Quick OSD contains a number of important adjustment
menus that you can access directly, without scrolling through all
the menus of the Extended OSD.
• In the Advanced OSD (see the chapter about the Advanced OSD
functions) you can determine which menus will appear in the
Quick OSD.
• When the on-screen display (OSD) is not on the screen, press
the control wheel shortly to display the Quick OSD.
The icon of the first menu in the Quick OSD appears.
• If you wish to select another menu, rotate the control wheel
again until the icon of the desired menu appears.
• When the icon of the desired menu is on the screen, press the
control wheel to enter into the menu.
• Rotate the control wheel again to perform the adjustment.
• When done, press the control wheel shortly to confirm the
change and return to the menu.
• To exit the Quick OSD, simply leave the control knob untouched
for a few seconds.
To Next Page
Loading...
