Operation
27
6. To toggle between an On and Off setting (e.g., in Settings), rotate
the control wheel to select the setting and press the control wheel
to toggle between On and Off.
How to save changes
When you have changed something and you wish to exit from the main
menu, the display asks if you wish to save the changes. The menu
header indicates the Preset to which the change is saved.
1. Rotate the control wheel to select Yes (to save the changes) or No
(if you do not wish to save the changes).
Tip: The selected line is displayed in a darker shade of gray.
2. Press the control wheel to confirm the choice.
Adjustments for a digital video signal
What to adjust if a digital video signal is connected and selected?
In most cases, no adjustments are necessary when a digital video signal
is connected and selected.
However, if necessary, you can perform manual adjustments. Please
refer to the description of the OSD functions further in this manual.
Adjustments for an analog video signal
What to adjust if an analog video signal is connected and selected?
The first time you connect an analog video signal to the display, you
need to perform the Autosetup function (see below).
Additionally, if necessary you can also perform manual adjustments.
Please refer to the description of the OSD functions further in this
manual.
Save Changes? (Preset x)
Yes
No
To Next Page
Loading...
