Technical Information
54
D-Sub 15 connector (analog video):
Figure 11: D-Sub 15 pin layout
Glossary
Calibration
Each display is calibrated in the factory before it is sent to the customer.
After this calibration, black and white luminance are set to the ideal
level.
A stabilization routine, constantly active when the display is on, keeps
these levels constant using the built-in sensor.
Pin no. Signal Pin no. Signal
1Red in 9DDC 5V IN
2 Green in 10 VGA PRES
3 Blue in 11 NC
4 NC 12 DDC SDA
5GND 13HS IN
6GND 14VS IN
7 GND 15 DDC SCL
8 GND SG Shielded Ground
5
15 11
10
1
6
SG
To Next Page
Loading...
