Operation
45
Current input format
Locking and unlocking user controls
The User Controls function allows to disable or enable the control wheel
functions.
When user controls are disabled, you cannot:
• display and use the Extended OSD
• switch the display in stand-by mode
To disable user controls:
1. When the OSD is not on the screen, rotate the control wheel to
display the Extended OSD. The Main Menu appears.
2. Rotate the control wheel to select Exit.
3. Press and hold the control wheel until the Advanced Main Menu
appears. This is indicated in the main menu header (Adv.).
4. Rotate the control wheel to select Settings.
5. Press the control wheel to enter the Settings menu.
6. Rotate the control wheel to select User Controls.
7. Press the control wheel to switch the setting Off.
8. Exit the menus and save the changes.
Vesa Table The version of the predefined Preset table
Bidulle The version of the video processing algo-
rithm
Name Description
Preset Number The number of the currently selected preset.
Name Description
To Next Page
Loading...
