PFWX-51B/PFWU-51B 07/08/2013
18
3.Physical Installation
3.3
Connecting the projector with the power net
CAUTION: Use only the power cord provided with the projector.
1.
Connect the female side of the power cord with the power input socket of the projector (1).
2.
Secure the power plug by locking the plug holder clamp (2).
Connect to Wall plug
3.
Connect the male side of the power cord to the local power net.
This power cord for Europe
and Korea
This power cord for USA This power cord for China
To Next Page
Loading...
