User Manual “Streaming Client“ - V1.31 - 8. Jan. 2007
4 Updating the Firmware
Barix preloads all Exstreamer family devices with the
“standard firmware” version, which suites most home
and consumer applications.
Barix recommends the use of the “Serial Rescue” method
when changing from “Standard” to “Streaming Client”
firmware.
For the alternative method “Web Update” the
“Web server port” has to be set to “0” or “80” to work
properly (0 will set the default port “80”).
If the web update is interrupted during the process
(power or network loss) the device might become
unreachable. In that case the “Serial Rescue” procedure is
the only remedy. Please keep that in mind when planning
a remote update.
4.1 Downloading the latest firmware
To download the latest “Streaming Client” firmware
version please visit www.barix.com.
• In the menu on the left side click on “downloads”
• In the center column select one of the Barix
Exstreamer devices and click on the name of the
device.
• Click in the section “Firmware” on the “Streaming
Client Update Kit” link to download it.
• Save the ZIP file and unpack it to a local drive.
• Read the "_readme1st.txt" file for detailed instructions.
Updating the Firmware 33
To Next Page
Loading...