User Manual “Streaming Client“ - V1.31 - 8. Jan. 2007
STEP 2
Type in the IP address of the Barix device and press
Enter
• Example: “192.168.0.12”
STEP 3
Click on the “Config” link if you see one. If you do not
see that link (you are already running “Streaming Client”
firmware on your device), proceed to step 4.
STEP 4
Click on the UPDATE button to enter the update page.
You will see the following screen:
STEP 5
Click on “Please click here to continue” to launch the
update process. The device will restart in a special mode
called “Boot loader” and the following screen appears
showing a number counting down from 4 to 0.
Updating the Firmware 35
To Next Page
Loading...