barox Kommunikation 42
5.3.2. Deployment and Authentication Settings using the Switch Management
Securing access to the CLI ssh vs. telnet
The access method can be set and non-required functions can be disabled, resp., as shown
below. The general deactivation of the Telnet access function is recommended where this is
allowed by the network design. Configuration methods can be set as shown below.
- The use of the SSH protocol for the command line-based management (CLI) is
recommended, as this method provides the encrypted connection.
Management of the access to the web GUI using http
- The generation of a separate user for http is recommended.
- Change of port 80, information: Please pay attention to the port information when accessing
via a browser!
- Access via HTTPs provides the highest level of protection due to the encryption of the
connection.
The following example shows the entry of the management address using a changed port
To Next Page
Loading...
General