barox Kommunikation 49
5.4.3. Supplementary Information regarding the Sending of SNMP Traps
Please assure yourself, that the events triggering a trap are configured accordingly. These
settings can be configured per terminal device elsewhere in the configuration menu as shown
in the following screenshot. Some events − such like e.g. port events − must also be set
accordingly in the port configuration.
ATTENTION: For industrial switches, this setting can be found under
Configuration/System/Alarm Notification.
Further information regarding the reading and testing of the configuration can be found
in „5.6 Reading-out SNMP Traps“.
To Next Page
Loading...
General