Operation Manual no. BP/IO/21/16 ed. 5.2.1
12 Reference standards
The design engineering of this product was based on the standards listed in Table 7:
Table 7: Reference standards
Standardization document Description
Directive 2014/34/EU
2
Equipment and protective systems intended for use in poten-
tially explosive atmospheres (ATEX)
PN-EN IEC 60079-0:2018-09
(EN IEC 60079-0:2018)
Explosive atmospheres. Part 0: Equipment. General require-
ments.
PN-EN 60079-11:2012
(EN 60079-11:2012)
Explosive atmospheres. Part 11: Equipment protection by in-
trinsic safety „i”.
PN-EN 50303:2004
(EN 50303:2000)
Group I, Category M1 equipment intended to remain functional in
atmospheres endangered by firedamp and/or coal dust.
Directive 2014/35/EU
3
Low Voltage Directive (LVD)
PN-EN 60529:2003/A2:2014-07
(EN 60529:1991/A2:2013)
Degrees of protection provided by enclosures (IP Code).
Directive 2014/30/EU Electromagnetic Compatibility (EMC)
PN-EN IEC 61000-6-2:2019-04
(EN IEC 61000-6-2:2019)
Electromagnetic compatibility (EMC). Part 6-2: Generic stand-
ards. Immunity for industrial environments.
PN-EN IEC 61000-6-4:2019-12
(EN IEC 61000-6-4:2019)
Electromagnetic compatibility (EMC). Part 6-4: Generic stand-
ards. Emission standard for industrial environments.
Other
PN-G-50003:2003
(Polish mining standard)
Occupational protection in mining. Electrical mining equipment.
Requirements and testing.
PN-G-42040:1996
(Polish mining standard)
Protection and safety measures in mining power engineering.
Earth leakage protection. Requirements and testing.
PN-EN 50628:2016-10
(EN 50628:2016)
Erection of electrical installations in underground mines.
13 End notes
BARTEC is the manufacturer of this product and reserves the right to changes and modifica-
tions as a result of technical progress and to use equivalent replacement parts.
This product has been manufactured in compliance with good engineering practices.
2
Only ATEX versions.
3
Only non-ATEX versions.
ER 100ims Page 19
To Next Page
Loading...