Operation Manual no. BP/IO/21/16 ed. 5.2.1
WARNING: Do not attempt to repair the product if you do not have the required qualific-
ations. Only BARTEC is authorized for the repairs. Improper or careless repair can lead
to serious accidents or death.
WARNING: Modification of the product or use of any spare part which does not comply
with BARTEC’s engineering conditions may result in severe injury and/or death hazards
and will result in loss of warranty rights and product approval.
3.2 Application restrictions
The field installation of the product shall follow the Operation Manual.
RESTRICTION: Do not attempt any makeshift installation of the product.
RESTRICTION: The use of the ER 100ims central-interlocking device is only possible in
conjunction with ED 100 or ED 100i chokes (or suitably rated wire resistors).
RESTRICTION: The installation shall be done with the required separation distances
from the external terminals of the product in compliance with EN 60079-11 Section 6.2.1
RESTRICTION: The ambient temperature limits are: −20°C ≤ Ta ≤ +70°C.
3.3 Directions for safe use
1. Prior to operating the product, read and understand this Operation and Safety Manual.
Refer also to the documentation of the system in which the product is operated.
2. Compliance with the Operation Manual and the guidelines and parameters listed in the
system documentation will guarantee reliable operation of the product. The user shall strictly
comply with the rules of operation. Non-compliance may result in loss of warranty right,
damage of the product or create operating hazards.
3. The management in the product user’s organisation is required to provide adequate training
for prospective operators of the product.
4. The only operators authorized to work with the product shall be properly qualified.
5. Follow all applicable health and safety regulations and this Manual.
6. Do not modify the product or use it with any spare parts which do not meet BARTEC’s
specifications for genuine spare parts. Unauthorized attempts at repairs of the product
may result in severe hazards to the operators and other personnel, and void the warranty,
certification and/or approvals.
7. All test instrument used for servicing of electrical equipment components shall comply with
applicable regulations.
8. Troubleshoot and maintain the product in witness of a trained assistant capable of isolating
the main power supply and providing first aid as necessary.
9. Any attempt at starting failed electrical equipment may result in hazards to operator’s health
or life and failure to other equipment.
Page 6 ER 100ims
To Next Page
Loading...