Operation Manual no. BP/IO/21/16 ed. 5.2.1
1 Introduction
The Operation and Safety Manual, no. BP/IO/21/16 is intended to provide the users of the
ER 100ims multifunctional relay (also referred to as „the product”) with the product design, oper-
ating principle and procedures of safe and correct operation.
1.1 Copyright
BARTEC Polska Sp. z o.o. reserves all intellectual property rights to the ER 100ims multi-
functional relay.
1.2 Warranty terms and conditions
The warranty terms and conditions are specified in BARTEC’s „General Terms and Conditions
of Sale and Delivery”.
All warranty claims and/or claims for material or personal damage will be rejected whenever
caused by:
• non-intended use of the product,
• improper transport, handling, storage, installation, wiring, commissioning, servicing, main-
tenance, repairs, removal and/or recycling,
• non-compliance with this Manual,
• unauthorized modifications in the connection layout of the product,
• improper inspection of wearing parts of the product,
• emergency caused by contact with foreign bodies or other causes.
2 Safety of operation
The product shall only be installed by qualified personnel trained in operation of Ex-rated
electrical equipment.
During operation, observe the requirements for maintaining the efficiency of the device, in
accordance with the documentation.
The protection features shall be calibrated according to their operating manuals approved for
use by the mine operations manager or another competent authority.
All repairs and maintenance of the ER 100ims shall be attempted with the live supply voltage
isolated and locked out from the equipment unit it is integrated with.
3 Identification of hazards
3.1 Hazards
The Operation Manual specifies sufficiently the correct maintenance of the product. However,
the personnel attempting maintenance shall hold valid electrical licenses.
WARNING: Read this Operation Manual prior repairing or maintaining this product.
ER 100ims Page 5
To Next Page
Loading...