Bartec USA TPMS PRO Series User Guide Rev5.1 Table of Contents
Page 46
9.6 Settings
View and configure the settings for TPMS Desktop, including Bluetooth connections. Access log files when
requested by Technical Support.
9.7 PAD
Launches the PAD application, used to program aftermarket replacement sensors using the Bartec Programming
Accessory Device (PAD) tool, sold separately (see Section 10.3
).
9.8 Technical Support
Links to Bartec’s Online Training, including Technical Service Bulletins, User Guides, training videos, and more.
10.0 Tool Service
Your PRO Series tool has been designed especially for the rugged automotive shop environment. When properly cared for and
maintained, it will provide years of service. However, accidents happen, and when they do, Bartec stands at the ready to deliver
excellent support and service to get you up and running again.
10.1 Proper Care and Cleaning
Like all electronic tools, your PRO Series tool should always be kept in a safe place away from liquids and damaging chemicals.
From time to time, cleaning of the enclosure and the screen will be required. To clean the tool, use a mild, non-abrasive spray
cleanser applied to a soft cloth, and wipe the external surfaces of the tool.
Never apply chemicals, cleansers, or liquids directly to the tool.
To Next Page
Loading...
Need help?
General