Bartec USA TPMS PRO Series User Guide Rev5.1 Table of Contents
Page 10
1.7 Bluetooth Setup
All PRO Series tools can be paired to a PC with Bluetooth capabilities, allowing you to send audit data wirelessly to the TPMS
Desktop application (see Section 9.0
for details on TPMS Desktop). You can also pair your tool to the Bartec Wireless Bluetooth
Printer accessory (sold separately – see Section 10.3 for part number) for quick and easy printing of audit data.
For your convenience, a Bluetooth dongle is included in every PRO Series tool kit. The dongle is to be used with PCs that do NOT
have internal Bluetooth capabilities. Follow the installation and setup instructions that are included in the Bluetooth dongle
packaging.
Do NOT use the included Bluetooth dongle if your PC already has internal Bluetooth capabilities. Using
both may cause conflicts with Bluetooth drivers and interfere with Bluetooth communications.
Insert the Bluetooth installation CD BEFORE connecting the Bluetooth dongle to the PC.
Refer to Section 8.2.2
for information on pairing your PRO Series tool to your PC and Wireless Bluetooth Printer.
1.8 Wi-Fi Setup (400PRO Only)
For publicly broadcasting WiFi networks, see Section 8.2.1
for instructions on connecting
to WiFi using your 400PRO tool.
For private, non-broadcasting WiFi networks, you can connect to WiFi via the Tool
Wireless Config application. You can download this application by clicking here:
http://tpmstopgun.com/wifi_tool.php
Or access it through TPMS Desktop by clicking on Technical Support, then selecting the
WiFi tab on the proceeding page.
To Next Page
Loading...
Need help?
General