Bartec R3 Series User Manual

Configuration PACTware
47
Operating Instructions Radiation sensors R3XX
Installing the isHRT USB interface driver
1. Please refer to the isHRT USB user manual.
2. The driver software must be installed before connecting the device!
3. Insert the supplied installation CD-ROM for the isHRT driver software
into the CD-ROM drive.
4. If the installation does not start automatically, call up the setup
programme for isHRT Multidriver.
5. The installation commences → follow the on-screen instructions:

Bartec R3 Series Specifications

General

Brand	Bartec
Model	R3 Series
Category	Accessories
Language	English