Maintenance
57
Operating Instructions Radiation sensors R3XX
6 Maintenance
Cleaning kit type R300-128 for pyrometers
BARTEC pyrometers are very durable and almost maintenance-free.
Maintenance is restricted to checking and cleaning the optics. If it is cleaned
regularly and carefully, the high reliability of the measuring system can be
preserved and guaranteed.
Arranged in a stable and convenient carrying case, the cleaning kit contains
all facilities to carry out the cleaning quickly and thoroughly and without any
risk for the process and the sensor.
If required, the components contained in the kit can be re-ordered
individually.
Use the vacuum brush to remove
loose dirt and dust particles. Dust that
is raised can be sucked off by means
of the rubber bellows.
Use the bellows to remove dirt
particles even from areas of the optics
that are difficult to access for the
brush.
To access deeper areas, you can
attach an extension nozzle.
To Next Page
Loading...