Page 60 of 82 OM0408/49
The temperature and magnetic susceptibility values are transmitted as ASCII character strings
which are evaluated by the software.
Figure 22. Susceptibility/temperature system.
Key to Figure 22
1. MS2WFP 7. MS2WF furnace
2. AC line 240/110V 8. MS2 meter
3. Water pump 9. Computer
4. Sample 10. GeoLab software
5. MS2W 11. Cables
6. Clamp 12. Water pipe
Note: This section is to be read in conjunction with the operation manual for GeoLab.
Caution: The furnace tube is protected by a transit tube which is retained by a hose clip.
Remove this before use carefully to avoid damage to the furnace insulation.
9
8
6
7
5
12
11
3
2
1
10
4
To Next Page
Loading...