Configuration through web interface– 22
User name: The user name to access the stream.
Password: The password to access the stream.
Motion
Select "Motion" to access the motion sensor settings
Motion detection options
Motion detection: Enable/disable the motion sensor.
Motion delay:The delay until the trigger when motion is detected.
Action to execute
Action to execute: Additional action when the motion sensor is triggered.
FTP: Sending the visitor's photo to the FTP server.
E-mail: sending the visitor's photo to the specified E-mail.
SIP call: SIP call to the specified number on the "Action" tab.
HTTP URL: GET request to the specified address.
HTTP URL: The URL which GET request will be sent to if the appropriate option selected.
An example of an ONVIF line: http://192.168.1.186:8090/onvif/device_service.
To Next Page
Loading...