Configuration through web interface– 40
Mode: Current operating mode. Phone or custom.
Mode settings
Return code when refuse: The code returned by the device in case of call refusing (404 Not
Found, 480 Temporary Unavailable, 486 Busy Here, 603 Decline).
Auto answer delay: Delay time until the panel makes auto answer (0 - 5 seconds).
Auto answer mode: The function which allows selecting the audio or video transmission during a
call.
Multicast codec: Codec for calls via Multicast (PCMU, PCMA, G722, G729).
Direct IP: Call using P2P.
Voice
Select “Voice” to access the voice settings:
For proper operation of the internal protocol, this function must be enabled.
To Next Page
Loading...