Configuration through web interface– 37
Local RTP
Starting RTP Port: The minimum value of the RTP port range (1024 –65535).
Maximum RTP port: The maximum value of the RTP port range (1024 – 65535).
SNMP
Status: Enable/disable the SNMP device control protocol.
Port: Used port (1024 – 65535).
Trusted IP: List of trusted IP addresses.
VLAN
Port Status: Enable/disable VLAN support.
VID: The VLAN identifier (1 – 4094).
Priority: VLAN priority (0 – 7, where 0 is the lowest priority).
To Next Page
Loading...