Basler BIP-640c User Manual

Configuring the Camera
Basler IP Camera 27
Stream AOI Left - As shown in Figure 4 on page 24, sets the left offset (in pixels) for the stream
AOI, i.e., how far the stream AOI will be offset from the left edge of the image area captured by the
camera’s sensor. The setting must be a multiple of 2.
See also, the stream AOI Editor description on the next page.
Stream AOI Top - As shown in Figure 4 on page 24, sets the top offset (in pixels) for the stream
AOI, i.e., how far the stream AOI will be offset from the top edge of the image area captured by the
camera’s sensor. The setting must be a multiple of 2.
See also, the stream AOI Editor description on the next page.
Stream AOI Width - As shown in Figure 4 on page 24, sets the width (in pixels) of the stream
AOI. The setting must be a multiple of 8.
See also, the stream AOI Editor description on the next page.
Stream AOI Height - As shown in Figure 4 on page 24, sets the height (in pixels) of the stream
AOI. The setting must be a multiple of 8.
See also, the stream AOI Editor description on the next page.

Basler BIP-640c Specifications

General

Brand	Basler
Model	BIP-640c
Category	IP Camera
Language	English