Batca omega 4 - STEP 1:

Batca Fitness Systems 10 Omega 4 Owner's Manual
Step 1:
Note: For a more consistent appearance, position all bolts in the direction
shown in each figure .
PLEASE FOLLOW ALL DIRECTIONS VERY
CAREFULLY FOR PROPER INSTALLATION.
Figure 1
Item # Part # Description Qty
1 BFP-10949 Omega 4 Base Hub 1
2 BFP-10951 Mid Row/Lat Pull Base 1
3 BFP-10959 Chest Press/Pec Fly Base 1
4 BFP-10956 Leg Ext/Leg Curl Base 1
76 BFH-50174 4 1/2” Pulley 1
78 BFP-51746 1/2” Pulley Spacer 2
100 BFP-51750 SHCS 3/8” x 2 3/4” 1
102 BFP-51747 SHCS 3/8” x 3” 6
111 BFH-50146 3/8” Flat Washer 12
112 BFH-50157 3/8” Nylock 7
DO NOT TIGHTEN
BOLTS UNTIL STEP 4
All Flat Washers and Nylocks
are 3/8” unless otherwise noted.
Anywhere a washer is against the
round side of a tube there is to be a
3/8” CURVED WASHER instead of a
Every place that a
pulley is inside a tube
there must be a pulley
spacer in use instead of a
flat washer.