EasyManua.ls Logo

Batca omega 4 - FINAL ASSEMBLY AND TROUBLESHOOTING; WEIGHT Stack Decals; GUIDE ROD

Batca omega 4
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.batcafitness.com 41 Omega 4 Owners Manual
Final Assembly and Troubleshooting
Top Plate
200lb Stack
Weight Stack Decals:
IMPORTANT - Check These Components Before Using Gym:
Each Cable with a threaded bolt on either end
must be threaded at least 1/2” into its attachment,
whether it be a Free Floater, Lockout Free Floater, or
the Top Plate of the weight stack. Each must also be
secured with a 1/2” Jam Nut to ensure a safe and
proper connection.
Record your serial number on the front
of this manual and keep for your records.
The serial number can be found back of the
Leg Extension/Leg Curl Base as shown in the
figure to the left.
Guide Rod
Clean guide rods with a lint-free cloth and apply a thin layer of silicone lubricant (Part # BFH-
50262) to each guide rod. This will ensure a glass smooth performance from your weight stack.
Free Floater