S
Samantha McintoshSep 9, 2025
Why does sewage come out of the discharge elbow of my battioni Pagani Water Pump?
- AAngela AndradeSep 9, 2025
If sewage is coming out of the discharge elbow of your battioni Pagani Water Pump, check the valves.
To Next PageTo Next PageWhy does sewage come out of the discharge elbow of my battioni Pagani Water Pump?
If sewage is coming out of the discharge elbow of your battioni Pagani Water Pump, check the valves.
Why is there little vacuum or pressure in my battioni Pagani Water Pump?
If your battioni Pagani Water Pump has little vacuum or pressure, it could be due to several reasons. If the cylinder is undulated, smooth or replace the body. If the reversing gear is badly positioned, remove it and position it correctly. If the flange assembly is too tight, add a gasket to the back flange. For Mec 9000-11000-13500-16500 models, if there's displacement of the sliding flange, reinsert the pins supplied between the body and flange for alignment.
What to do if P.T.O. does not rotate on battioni Pagani MEC 8000?
If the P.T.O. of your battioni Pagani Water Pump does not rotate, first check for broken blades and replace them, also check if the rotor pin is bent. Second, check for any foreign body in the rotary blades vacuum pump and remove it. Third, ensure that the handle and reversing gear are correctly positioned. If the rotary blades vacuum pump rotates in the wrong direction, reverse the direction of rotation. Finally, if all blades are jammed or protrude anomalously from the rotor slots, disassemble the rotary blades vacuum pump, then clean and wash the blades, rotor, and body.
Why is my battioni Pagani MEC 8000 beating against the external surface?
If your battioni Pagani Water Pump is beating against an external surface, it might be due to a rate of revs that is too low; in this case, increase the rate of revs. Alternatively, it could be caused by excessive/short and/or not suitable lubrication oil; in this case, clean the rotary blades pump and replace the oil.
How to fix no circulation of lubricating oil in battioni Pagani Water Pump?
If there is no circulation of lubricating oil in your battioni Pagani Water Pump (for versions with automatic lubrication), it could be due to air intake at pipe fittings. In this case, replace the pipe fittings. Also, ensure that the lubrication tube is correctly inserted in the pipe fittings. Finally, if there is air in the oil pump chamber, fill the pump chamber with oil.
Why does smoke come out of the discharge elbow of my battioni Pagani MEC 8000 Water Pump?
If smoke comes out of the discharge elbow of your battioni Pagani Water Pump, it is likely due to excessive lubrication. Adjust the lubrication to resolve this issue.
What to do if there is air infiltration or leakage from the battioni Pagani Water Pump system?
If there is air infiltration or leakage from the battioni Pagani Water Pump system, eliminate the infiltrations.
What to do if blades are jammed in the rotor of my battioni Pagani Water Pump?
If some blades are jammed in the rotor of your battioni Pagani Water Pump, disassemble the rotary blades vacuum pump, then clean and wash the rotor, blades, and body.
Why is there no circulation of lubricating oil in my battioni Pagani Water Pump?
If there's no circulation of lubricating oil in your battioni Pagani Water Pump (for versions with automatic lubrication), it could be due to air intake at the pipe fittings; in this case, replace the pipe fittings. It's also possible that the lubrication tube is badly inserted in the pipe fittings; make sure to insert the lubrication tube correctly. Another cause could be air in the oil pump chamber; if so, fill the pump chamber with oil.
What causes a battioni Pagani Water Pump P.T.O. not to rotate?
If the P.T.O. of your battioni Pagani Water Pump isn't rotating, it could be due to broken blades. Replace the blades and check if the rotor pin is bent. Another possible cause is a foreign body inside the rotary blades vacuum pump; if so, remove the foreign body.
General| Brand | battioni Pagani |
|---|---|
| Model | MEC 8000 |
| Category | Water Pump |
| Language | English |
