Operating Manual for FAN Press Screw Separator PSS 1.2/3.2/3.3/5.2
4.4 FEATURES, IDENTIFICATION AND INFORMATION
To make it easier for you to familiarize yourself with your new FAN press screw separator, Fig. 4-2
shows you a longitudinal section of the internal machine design.
We assist every customer in optimally selecting the right main separator components for the specific
application before it is purchased, manufactured, assembled and shipped.
The precise article numbers of the wearing parts and the organization of the main components can be
found in the replacement parts list.
Item Part Item Part
1 Geared motor 10 Screen 520 (780)
2 Screen housing 11 Wearing profile 520 (780)
3 Mouth piece 12 Screen guide rails 520 (780)
4 Output regulator with rod 13
Housing extension (only for PSS1.2-780, PSS3.2-1040 and PSS5.2-1040)
inflow options: Oscillator, Oscillator
with hopper, inflow-cover or Hopper
Screen 260 (only for PSS 1.2-780, 3.2-780, 3.3-780, 3.2-1040, 5.2-780,5.2-1040)
6 Auger 15 Wearing profile 260 (only if screen 260)
7 Auger bolt 16 Screen guide rails 260 (only if housing extension is mounted)
8 Weights 17 Supplemental seal
9 Housing protection ring
To Next Page
Loading...