17 CONFORMITY DECLARATION
EC Conformity Declaration
according to EC Directive 2006/42/EC
The manufacturer
FAN Separator Gesellschaft m.b.H.
Bernecker Straße 5, D-95509 Marktschorgast - Germany
Tel: +49 9227/938-400; Fax: +49 9227/938-444
declares that the machine named below
Machine designation FAN PRESS SCREW SEPARATOR
Machine type / base device PSS 1.2 – 520 PSS 3.3-780
PSS 1.2 – 780 PSS 5.2.520
PSS 3.2 – 520 PSS 5.2.780
PSS 3.2 – 780 PSS 5.2-1040
PSS 3.2 – 1040
correspondingly applies to the relevant provisions of the following directives.
Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
The following standards in the current versions were applied correspondingly:
EN ISO 12100:2011/03 Safety of machinery -General principles for design risk assess-
ment and risk reduction
EN ISO 13857:2008/08 Safety of machinery – Safety distances to prevent hazard zones
being reached by upper and lower limbs
EN 349:2008/09 Safety of machinery - Minimum gaps to avoid crushing of parts of
the human body
This declaration becomes void in event of any changes to the machine made without the
approval of FAN Separator GmbH.
Party responsible for documentation: Thomas Theissl, Kowaldstraße 2, 8570 Voitsberg, Austria
To Previous Page
Loading...