Bauer PSS 1.2 - Type Plates - Information Signs; Information on the Separator Type Plate; Information Signs; Separator Technical Data

12
Operating Manual for FAN Press Screw Separator 1.2/3.2/3.3/5.2
S
4.5 TYPE PLATES - INFORMATION SIGNS
When you contact your dealer or communicate directly with FAN GesmbH about wearing parts or for
technical support for your press screw separator, you will be asked for your serial number and machine
number in order to ensure faster and more effective assistance.
The type, year of manufacture and serial number of the separator is indicated on the type plate riveted
to the screen housing near the inflow. Another type plate is located on the geared motor. Associated
details can be found in the enclosed geared motor documentation.
4.5.1 Information on the Separator Type Plate
The FAN Press screw separator type plate contains the following information:
 Separator type: PSS1.2-520;PSS1.2-780;PSS3.2-520;PSS3.2-780;PSS3.2-1040;
PSS 3.3-780;PSS5.2-520;PSS5.2-780, PSS 5.2-1040
 Screen used: e.g. 0.5 mm or 1.0 mm
 Serial number: e.g. 1409431 (14 is a year, 09 is a month, 431 is a counter)
4.5.2 Information Signs
The following information signs are located on the FAN press screw separator:
 Red arrow on the mouth piece; indicates the correct rotation direction of the auger shaft
 Yellow text field on the mouth piece; warns of a turning part
 Yellow warning symbols on the housing shell; indicate that turning parts should not be
touched
 Yellow text field on the geared motor; indicates the lubrication interval for the sealing
grease
Any damaged signs must be replaced. These can be ordered from your dealer.
4.6 SEPARATOR TECHNICAL DATA
Part name
Data
Material
Auger, auger shaft
Auger with special surface hard-
ening
Steel, stainless (PSS 5.2 V4A)
screen
Available gap widths 0,1,0,15,0.25
/ 0.35 / 0.5 / 0.75 / 1.0 mm
Steel, stainless (PSS 5.2 V4A)
Bearing housing
Grey cast iron, painted
Separator housing
Grey cast iron, painted
Inflow
Inflow-flange, hopper, oscillator
with and without hopper
Steel, galvanized (PSS 5.2-V4A)
Bottom discharge connection
1.2-520,5.2-520
Bottom discharge connection
3.2-520; 3.2-780,3.3-780 5.2-780
Pipe connection DN100
Pipe connection DN125
integrated into separator housing
Bottom discharge connection 1.2-780
3.2-1040, 5.2-1040
Pipe connection DN100/DN100
Pipe connection DN125/DN100
separator housing/housing extension
separator housing/housing extension
Motor
4kW, 50Hz 400V IP55 F
5.5 kW, 50 Hz, 400 V, IP55, F
7.5 kW, 50 Hz, 400 V, IP55, F
f. PSS1.2-520
f. PSS1.2-780; 3.2-520; 3.2-780; 5.2-520; 5.2-780
f. PSS3.3-780; PSS3.2-1040; f. PSS5.2-1040
Underframe
Steel, stainless (5.2 V4A)
Gearbox
Cylindrical gearing (50 Hz)
Oil quantity and type – see type
plate on gearbox
Grey cast iron
ATTENTION!
ROTATING PARTS