EasyManua.ls Logo

Baumatic BT2710SS - Gas connection

Baumatic BT2710SS
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
corner of the base of
the appliance.
o IMPORTANT: They must be screwed clockwise into position and
not just slotted into the holes on each corner.
Gas connection
This appliance must be installed by a competent
person in accordance with the current versions of
the following UK (United Kingdom) or ROI (Republic
of Ireland) Regulations and Safety Standards or
their European Norm Replacements.
Important information
o ural gas only and cannot
be used on any other type of gas without modification.
o
a qualified person. For information on the use of
other gases, please contact the Baumatic Technical Department.
o on, in
accordance with the current edition of the Gas Safety
and Use) (Amendment) Regulations and the
relevant building/I.E.E. Regulations.
r
Baum
regula
o the UK, CORGI registered installers are authorised to
ation and service work, in compliance with
the above regulations.
o To assemble them it is necessary to raise the cooker and to
screw the four legs into position, on each
This cooker is supplied to run on nat
Conversion for use on LPG and other gases must only be
undertaken by
The cooker must be installed by a qualified pers
(Installation
o Failu e to install the appliance correctly could invalidate
atic’s guarantee and lead to prosecution under the
tions quoted above.
In
undertake the install

Related product manuals