30
Gas a ion to LPG and flow adjustment).
d
IM O
supp
o Remove the pan-stands, burners and flame
the stipulated injector for the new gas
supply (see table below).
o Reassemble all the burners carefully; in particular you should
make sure that the flame spreader is correctly placed on the
burner.
IMPORTANT: After ch the
minimum flow adjustme age.
djustment (Convers
All work must be carried out by a CORGI registere
engineer.
P RTANT: Always isolate the cooker from the electricity
ly before changing the injectors.
spreaders (A).
o Unscrew the injector (B) and replace it with
anging the injectors YOU MUST follow
nt section on the next p
To Next Page
Loading...
