EasyManua.ls Logo

Baumatic BT2710SS - My appliance isnt working correctly; Oven Not Coming On

Baumatic BT2710SS
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
ns supply cable is damaged, then it must be replaced with a
uitable replacement cable.
he mains supply cable should be replaced in accordance with the
fol
o
o f the supply board.
o Replace the cable with one of the same length and in accordance
Replacing the mains supply cable
If the mai
s
T
lowing instructions:
Switch the appliance off at the control switch.
Open the box o
o Unscrew the clamp (A) fixing the cable.
with the specification given above.
o The “green-yellow” earth wire must be connected to the terminal
marked . It must be about 10 mm longer than the live and
neutral wires.
e
My appliance isn’t working correctly
o The “blue” neutral wire must be connected to the terminal
marked with letter (N) - the live wire must be connected to th
terminal marked with letter (L).
o The oven isn’t coming on.
* Check that the oven is in manual operation mode.
ng function and a cooking
temperature.
o here appears to be no power to the oven and grill.
* Check that the appliance has been connected to the electrical
mains supply correctly.
* Check that the mains fuses are in working order.
he main oven does not.
* Check that you have selected a cooki
T
o The grill function works but t
* Check that you have selected the correct cooking function.

Related product manuals