11
Locate the power cord from the front console and plug from the line filter in back of
the game to the wall outlet.
Position the assembled rear cabinet up against wall in final game position.
Assemble middle cabinet section:
Tip middle section down horizontal as shown:
B
CONNECT 4 HOOPS HD SETUP
Carefully lift upper rear cabinet up onto the top of the bottom rear cabinet.
It will slide into position as shown.
Locate the 2 of metal rear connector plates. Part 1 from box # 1.
Install the plates on both sides of the cabinet with 12 of the black
¼-20 X 1 Phillips head bolts using a # 3 Phillips Head bit.
(6 per side)
Upper Rear
Cabinet
Lower Rear
Cabinet
1
A5BOPH312
To Next Page
Loading...
