Bayliner 245 - Chapter 3: Propulsion & Related Systems; Engine

22
245 • Owner’s Manual Supplement
Chapter 3: Propulsion & Related Systems
Engine
Read the engine operation and maintenance manuals before starting or doing any maintenance on the engine.
Bilge Blower System
• The bilge blower removes explosive
fumes from the engine and bilge areas.
• Fresh air is drawn into the engine and
bilge areas through the vents.
To make sure the engine and bilge
areas are properly ventilated:
• Use the "sniff test" to check the engine
and bilge areas for fuel vapors before
starting the engine.
• Always run the bilge blower for at least
four minutes before starting the engine.
• Continue to run the blower until your
boat has reached cruising speed.
• Always run the blower when running
the boat below cruising speed.
FIRE/EXPLOSION HAZARD
• Use of the bilge blower system is NOT A GUARANTEE that explosive fumes have
been removed.
• BEFORE starting the engine ALWAYS use the "sniff test" to check the engine and bilge
areas for fuel vapors.
• If you smell fuel, do NOT start the engine and do NOT turn On any electrical devices.
• If you smell fuel and the engine is already running, shut Off the engine and turn Off all elec-
trical devices. Investigate immediately.
• Do NOT obstruct or modify the bilge blower system.
WARNING!
!
BLOWER
MOTOR
FROM LOUVERS
MOUNTED ON DECK
TO LOUVERS
MOUNTED ON DECK
BLOWER
HOSE