Chapter 12: Electrical System 245
•
Owner’s Manual
Supplement
58
Connecting to Shore Power
1. Review all hazard information
at the beginning of this section,
Shore Power.
2. Turn Off all breakers and
switches on the AC master
panel.
3. Attach the shore power cord to
the boat inlet first, then to the
dockside outlet.
4. Turn the "SHORE POWER 1"
master breaker On.
5. Turn On the individual compo-
nent breakers as required.
SHOCK & ELECTRICAL SYSTEM DAMAGE HAZARD!
• Monitor the polarity indicator lights every time you connect to shore power.
• If a reversed polarity light turns On when you are connecting to shore power, do NOT turn
On the main breaker switches.
• Instead, immediately unplug the shore power cord (always from the dockside outlet first)
and alert marina management.
WARNING!
!
SHORE POWER
INLET
To Next Page