31
REV 0.9.5
Alexa, Tell CyberQ Cloud, set food 1 target temperature to 100.
Alexa, Tell CyberQ Cloud, set food 2 target temperature to 130.
Alexa, Tell CyberQ Cloud, set food 3 target temperature to 150.
Alexa, Tell CyberQ Cloud, set food 1 name to sausage.
Alexa, Tell CyberQ Cloud, set food 2 name to brisket.
Alexa, Tell CyberQ Cloud, set food 3 name to hamburgers.
Alexa, Tell CyberQ Cloud, set timer to 1 hour and 30 minutes.
Alexa, Ask CyberQ Cloud, how much time is left on the timer?
Multiple Devices: Amazon Alexa voice control will control the default CyberQ
Cloud. For our customers who own more than one CyberQ Cloud, we have add-
ed the ability to change the default device in your account with the sound of
your voice. This way you can switch between your device and control each one
with your voice. To switch your default device say:
Alexa, Tell CyberQ Cloud, Switch Default CyberQ Cloud.
Alexa will then prompt you with the names of the different devices with a num-
ber for each one. You then should respond with the number for the device you
want as your new default. Once successfully changed, your voice commands
will now use your new default device.
13. BUILDING A PROPER FIRE FOR GOOD CONTROL
How you build the fire in your pit is critical for good control, especially at low
cooking temperatures. Stack the charcoal inside your pit so it’s shaped like a
pyramid, small at the top and large at the bottom. Light the fire by lighting a
few coals at the top. Do not over-fire the charcoal or light it at the bottom, be-
cause this will only cause your pit to over-fire during startup. Some overshoot
is normal; try setting your cook temp 15-20 degrees lower when starting and
raising it after your meat is on and the temperature has stabilized.
ELIMINATING LARGE FLUCTUATIONS IN THE PIT TEMPERATURE
Normally, the CyberQ Cloud Wi-Fi will be able to adjust the airflow via the
blower to deliver precise control and no damper adjustment will be required. If
the pit has become over-fired or if you built the fire too big, you may see large
temperature swings (+/- 10 degrees or more). To eliminate this you may need
to restrict the airflow by adjusting the blower damper. A good rule of thumb
is that if you see large temperature swings, try closing the damper to half the
current setting; the pit should stabilize within 10-15 minutes after adjustment.
EXTINGUISHING THE PIT
If there is fuel left over from the cook, you can save this fuel by shutting any
open dampers or removing the blower and insert the kill plug into the fan
adapter. This should put the fire out in about 30-45 minutes.
To Next Page
Loading...