2-3
MX67QMD
CPU
▶ Installing the CPU
Important
• On the upper end of the CPU socket is a socket actuator in the form of a
slotted screw head. Make sure that you open or close the socket with a
fl athead screwdriver before and after installing the CPU.
• When installing the CPU, make sure the cooler set is installed as well
and can work properly to protect the CPU from overheating. For proper
CPU cooler type, please consult the dealer.
1. Turn the socket actuator counterclockwise to open the socket.
2. Place the CPU on top of the socket. Make sure that the gold arrow on
the CPU is aligned with the arrow key on the socket.
3. Push the CPU gently down until its pins securely fi t into the socket.
4. Turn the socket actuator clockwise to close the socket and secure the
CPU in place.
To Next Page
Loading...
