￭ BIOS Setup
3-24
Power
▶ ACPI Sleep State
This item specifi es the power saving modes for ACPI function. If your oper-
ating system supports ACPI, you can choose to enter the Standby mode in
S1 (POS) or S3 (STR) fashion through the setting of this fi eld.
▶ Restore AC Power Loss
This setting specifi es whether your system will reboot after a power failure
or interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before
power failure or interrupt occurred.
▶ Resume On USB from S3/S4
The item allows the activity of the USB device to wake up the system from
S3/S4 sleep state.
To Next Page
