￭ Hardware Setup
2-16
Jumper
Clear CMOS Jumper: JCMOS1
There is a CMOS RAM onboard that has a power supply from an external
battery to keep the data of system confi guration. With the CMOS RAM, the
system can automatically boot OS every time it is turned on. If you want to
clear the system confi guration, set the jumper to clear data.
Clear CMOS Keep CMOS
1
1
JCMOS1
1
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return
to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will
damage the mainboard.
To Next Page
Loading...
