BCM Advanced Research MX67QMD - Page 26

￭ Hardware Setup
2-14
LVDS Inverter Connector: JINV1
The connector is provided for LCD backlight options.
2.GND
3.
LVDS_BLON
4.
L_BKLT_CTRL
#
5.VCC5
1.+12V
LVDS Connector: JLVDS1
The LVDS (Low Voltage Differential Signal) connector provides a digital in-
terface typically used with fl at panels. After connecting an LVDS interface
fl at panel to the JLVDS1, be sure to check the panel datasheet and set the
JVDD1 jumper to proper power voltage.
39.GND
27.GND
25.
LVDS1_DATA 3 N
23.LVDS1_CKN
21.LVDS1_DATA 2 N
19.LVDS1_DATA1 N
17.LVDS1_DATA0 N
15.Backlight Enable
13.Backlight Control
11.LDDC_CLK
9.LCD_VDD
7.+3.3V
5.+12V
3.+12V
1.+12V
40.GND
28.GND
26.
LVDS1_DATA 3 P
24.LVDS1_CKP
22.LVDS1_DATA 2 P
20.LVDS1_DATA1 P
18.LVDS1_DATA0 P
16.GND
14.LVDS_VDDEN
12.LDDC_DATA
10.LCD_VDD
8.GND
6.GND
4.+12V
2.+12V
37.
LVDS2_DATA 3 N
35.LVDS2_CKN
33.LVDS2_DATA 2 N
31.LVDS2_DATA1 N
29.LVDS2_DATA0 N
38.
LVDS2_DATA 3 P
36.LVDS2_CKP
34.LVDS2_DATA 2 P
32.LVDS2_DATA1 P
30.LVDS2_DATA0 P