3-11
MX67QMD
▶ Super IO Confi guration
▶ Serial Port 1/ 2/ 3/ 4/ 5
This setting enables/disables the specifi ed serial port.
▶ Change Settings
This setting is used to change the address & IRQ settings of the
specifi ed serial port.
▶ Mode Select
Select an operation mode for the serial port 1.
▶ Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that
generates a reset when the software that it monitors does not re-
spond as expected each time the watch dog polls it.
To Next Page
Loading...
