BD Pyxis iMX113 - Product Specifications; Operating Standards

iMX113 BD Pyxis ™ ES Refrigerator Tower Operation Manual
360395/E 16
6 ProductSpecications
6.1 Operating Standards
These units are designed to operate under the following environmental conditions:
♦ Non-residential, indoor use only
♦ Altitude (maximum): 6.56k ft (2000 m)
♦ Ambient temperature range: 59°F to 90°F (15°C to 32°C)
♦ Relative humidity (maximum for ambient temperature): 80% for temperatures up to 89°F (31°C); 76% at 90°F (32°C)
♦ Temperature control range: 36°F to 46°F (2°C to 8°C)
♦ Overvoltage Category II
♦ Pollution Degree 2
♦ RF Emissions: Group 1 - Class A
♦ EMC Environment: Basic
♦ Sound level is less than 70 dB(A).
Table2.ElectricalSpecications
113
Input Voltage and Frequency 115V, 60Hz 230V 50/60Hz
Voltage Tolerance ±10%
Circuit Breakers 4.0A quantity 2
Current Draw* 2.3A 1.12A
Power Source Grounded outlet, meeting National Electric Code (NEC) in the U.S. and local electrical requirements in all locations.
Remote Alarm Capacity 1.0A at 33 V (RMS) or 30 V (DC)
* Amperage values are subject to change. Refer to the product specication label on your unit for current values.
NOTICE
• The interface on the remote alarm monitoring system is intended for connection to the end user’s central alarm
system(s) that uses normally-open or normally-closed dry contacts.
• If an external power supply exceeding 33 V (RMS) or 30 V (DC) is connected to the remote alarm monitoring system’s
circuit, the remote alarm will not function properly; may be damaged; or may result in injury to the user.