S2928F Hardware Installation Manual
- 18 -
(2) See the following figure.
(3) When the cover and the bottom are closely tied, let the cover slide the slot of the
front template at the bottom.
(4) Nail the bolt and screw it tightly with the screwdriver.
(5) Reinstall the switch on the cabinet or the desk.
(6) Reconnect all cables of the switch.
4.3 System Memory Upgrade
4.3.1 SDRAM Expansion
Because SDRAM ofS2928F adopts the patch design, you have to offer your SDRAM
expansion requirement before purchase.
To Next Page
Loading...
