28
Maintenance
MAB 800 / MAB 840
Maintenance
WARNING
Danger caused by unqualied repairs!
Unqualied repairs can pose considerable dangers for the user
and cause damage to the machine.
► Repairs to electrical appliances may only be carried out by
the works after-sales service or by specialists trained by the
manufacturer.
Adjusting the guide of the machine slide
If the guide of the machine slide (15) shows signs of backlash, it
must be adjusted. Proceed as follows:
Loosen the clamping bolts.
Tighten the adjusting screws uniformly.
Tighten the clamping bolts again.
Replacing the carbon brushes
Replacement of the carbon brushes may only be carried out by
BDS or by an authorised repair workshop. Unauthorised repairs
will void the warranty.
After-Sales Service/Service
Should you have any questions about after-sales service or
service, please contact BDS. We will be happy to give you the ad-
dress of your nearest service partner.
To Next Page
Loading...
