9
1. INTRODUCTION
Dear customer, thank you for choosing the MICROBEAST!
MICROBEAST is an easy to use three axis gyro system which makes it possible to y R/C helicopters
without a mechanical ybar. This brings a boost in power as well as longer ight times and makes it
possible to adapt the agility and ying behavior of your helicopter to your individual preference.
The MICROBEAST has a built-in high end tail gyro based on the latest MEMS Technology which gives
your helicopter‘s tail perfect stopping behavior and constant rotation rate during any manoeuvers.
The MICROBEAST can be used in nearly any size of helicopter, using either electric motors or nitro en-
gines for propulsion. It provides ight stability for beginners and maximum agility and precision for
intermediate and professional pilots.
Nevertheless, the MICROBEAST is not a ying aid for beginners! If you are inexperienced with model
helicopters, please consult an experienced pilot for help with setup and your rst ights.
The following manual will lead you step by step through the setup procedure from the correct moun-
ting of the unit up to the rst ight. Please read the following instruction manual thoroughly. You will
see that during the development of the MICROBEAST, that our focus is to user friendly and soon you
will be able to operate the system intuitively.
The included overview map of the setup menu can be taken out to the ying eld as a quick reference
to the various menu options.
Check our website WWW.BEASTX.COM where we will inform you about the latest updates and down-
loads.
Now have fun and a good time using MICROBEAST!
Sincerely, the BEASTX-Team
To Next Page
Loading...