FUNCTION
(only when the control panel is detached, for qualified technicians only)
INITIAL OPERATION, RELAY, TOTAL RUNNING TIME
(date of initial operation, relay switching frequency, total running time)
INITIAL OPERATION
RELAY
TOTAL RUNNING TIME
FUNCTION
AUTO
1. You have confirmed the function RAIN/TEMP or GROUP - INITIAL
OPERATION appears.
2. Confirm with OK. RELAY appears.
3. (RELAY denotes the relay switching frequency.)
4. Confirm with OK. TOTAL RUNNING TIME appears. (TOTAL RUNNING
TIME denotes the total switching time of the relay.)
5. Confirm with OK.
6. Press the MENU button to switch to Operating mode.
56-en
To Next Page
Loading...
