Becker CentronicPLUS EC548 PLUS - What to Do if

What to do if...?
Problem Remedy
Tubular drive/receiver is not re-
sponding.
Insert new batteries into the hand-
held transmitter.
Insert batteries into the hand-held
transmitter correctly.
Reduce distance from receiver.
Program transmitter.
Check the receiver.
Required tubular drive/receiver is not
responding.
Select correct channel.
LED ring flashes yellow or red 4
times.
Insert new batteries into the trans-
mitter.
The LED ring lights up red when the
receiver for the setting mode is se-
lected.
Reduce distance from receiver.
Check electr. connection of the re-
ceiver.
Put the receiver into programming
mode.
Add the transmitter to the installa-
tion.
27-en