Becker CentronicPLUS SWC548 PLUS - Page 34

Briefly press the function button to go to the set-
tings for the wind threshold.
▻ The LED ring of the transmitter shows
the currently set wind threshold by
lighting up red and white.
Press the / button to adjust the threshold to
one of 11 stages (approx. 2 m/s to 22 m/s).
At the highest stage, the LED ring lights up com-
pletely red, and the selected receiver will only re-
act to extremely high wind strengths. Press the
STOP button to restore the default threshold (ap-
prox. 8 m/s).
Briefly press the function button to go to the set-
tings for the rain reaction.
▻ The LED ring of the transmitter shows
the currently set rain reaction.
Lights up with a
blue rotational
movement in
the UP direc-
tion
The receiver retracts when it
rains.
Lights up blue
in the centre
The receiver does not react to
rain.
Lights up with a
blue rotational
movement in
the DOWN dir-
ection
The receiver extends when it
rains.
Set the desired reaction by pressing the , STOP
or button.
34-en