26
>>> GENERAL OPERATION
Switching on
> Press the button on the top of the
Navigation device.
The unit is switched on. The
manufacturer's logo appears on the
touchscreen.
When the Navigation device is started for
the first time, the language selection is
displayed automatically.
Using the buttons or the scroll
wheel, it is possible to scroll through the
list in the direction of the relevant arrow.
> Press the button for the required
language.
> The selection is confirmed by pressing
OK.
> Then select the desired voice.
A short example announcement is given.
> Confirm your selection by pressing the
OK button.
The following prompt appears shortly
afterwards:
> If you agree to the request contained in
this prompt, press the
OK button.
Switching off (depending on model)
You can switch the unit off at any time.
> Press the button on the top of the
Navigation device.
The Navigation device switches to sleep
mode.
> Before finally switching off the naviga-
tion device, press the I/O switch on the
underside of the device to 0.
Note: for models with TTS
Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).
Note:
Use of the Navigation device is only
permitted in accordance with the
national road traffic regulations
applicable at the time.
To Next Page
Loading...
Need help?
General
