80
>>> NAVIGATION MODE
You can now set whether or not the road
should be blocked for each day of the
week.
> Confirm your settings by pressing the
back button .
or
> Press the button under one of the
days and set up to two times when the
road should be blocked.
> Using the buttons set the first
period when the road is to be blocked
on this day.
> Using the buttons set the second
period when the road is to be blocked
on this day if necessary.
> Confirm your settings by pressing the
back button .
The Vehicle data button
This menu allows the calculation of an
economic route by using the fuel
consumption of the vehicle.
> Press the
Vehicle data button.
The Vehicle data window is displayed.
The following settings can be made:
> Press the
Urban button to enter the av-
erage fuel consumption of the vehicle
within cities. The input menu for num-
bers appears. Any existing inputs can
be deleted with the arrow buttons. En-
ter the fuel consumption value with
the number keys. The value can be giv-
en to one decimal point. Confirm your
entry by pressing the
OK button.
Note:
Press the
Block 24 h, button to set a
block for an entire day.
Press the
Use setting for... button to
also use the block on other days.
To Next Page
Loading...
Need help?
General
